Note: The components listed are not all standard options. Availability of components may vary per model.
The information below reflects the default materials supplied for each CLC cabin unless specified otherwise. Exterior framed walls • 1 x 6 rustic cottage siding • 1 3/4” x 3 1/2” trim corners • 2x4 exterior stud walls @ 16” o.c. w/ double top and bottom plate (total wall height 6’-6”) • 7/16” OSB sheathing • Air barriers (15lb felt) • R-6.6 foil face wrap insulation • 7/16” bead board for the interior side of exterior stud walls • 1x4 base, corner, and ceiling trim • Exterior preservative Exterior doors and windows • 1 3/4” x 3 1/2” exterior trim • 3/4” x 3 1/2”interior trim • Flashing, Caulking, and moisture & air membrane • Hinged entry door; Therma-Tru Smooth-Star S262 (Total rough opening height is 6’-3”) w/ hard ware and locksets • Gliding patio door; Silverline (Model #)(Total rough opening height is 6’-3”) w/ hardware and locksets • Windows; Silverline construction series windows (insulated glass w/grilles and screens) Interior framed walls • 2x4 common studs @ 16” o.c. • 2x4 bearing/plumbing stud walls @ 16” o.c. • 7/16” bead board wall finish • 1x4 base, corner, and ceiling trim • 1 3/4” x 3 1/2” Sill Interior doors • Pre-hung (split jamb) raised panel wood doors w/hardware • 1x4 door trim 1st level floor system • 4x4 P.T. skid joists • 2x6 joists w/2x6 perimeter box • 5/8” OSB T&G subfloor • R-6.6 foil face wrap insulation • Metal joist hangers (if applicable) • Metal joist bridging (if applicable) • Construction adhesive *All pavilions do not include floor system in price. 2nd level floor system • 2x4 or 2x6 joists as specified on drawings • 5/8” OSB T&G subfloor • Metal joist hangers (if applicable) • Metal joist bridging (if applicable) • Construction adhesive Stairs/interior railing • Loft ladder (2x4’s) • 4x4 posts with 2x4 railing Roof systems • 2x6 rafters @ 16’ o.c. w/2x6 ridge board • Pre-fab trusses @ 16” o.c. • R-6.6 Foil face wrap insulation • 7/16” bead board ceiling finish • 30lb felt • 25 year 3-tab • Ice and water shield (as applicable) • Drip edge, flashing, and ridge vent •1x/ 2x fascia (as applicable) • 1x8 T&G Soffit • 1x/ 2x fascia (as applicable) • Strip vent • 7/16” bead board soffit Porches/decks • Roof • 2x6 rafters @ 16’ o.c. w/2x6 ridge board • Pre-fab trusses @ 16’ o.c. • 7/16” bead board ceiling finish • 30lb felt • 25 year 3-tab • Ice and water shield (as applicable) • Drip edge, flashing, and ridge vent • 2x4 P.T. floor joists @ 16” o.c. • 2x4 P.T. header • 5/4” P.T. decking • 4x4 P.T. posts, 4x4 P.T. header, 2x4 P.T. angle braces, 2x4 P.T. railing, and 2x2 P.T. balusters • 7/16” bead board ceiling
Specifications subject to change without notice. Renderings are for illustration purposes only.
